How to adjust the DC motor speed

Update:05-12-2017
Summary:

For the DC motor, the right speed for our use, our work […]

For the DC motor, the right speed for our use, our work is very helpful, then we have to how to adjust a suitable speed?

1, disconnect the DC motor power, open the box machine, loosen the lid screws, remove the lid.

2, switch on the power supply, according to the controller's up or down keys, so that the DC motor controller up and down 90 degrees run 4 to 5 times, if the rod time bar appears jitter phenomenon, indicating that balance spring tension is not enough, the DC motor control Run to the vertical state.

3, if the rod lever appears jitter phenomenon, indicating that the balance spring tension is too large, repeat the above operation.

4. Use a hexagonal wrench to adjust each tension spring screw so that the DC motor controller achieves the best result when the rod is dropped.

5, in the starting rod, if the DC motor controller is running and the DC motor controller does not move, indicating tension tension spring tension is not enough to adjust the tension spring state or increase the tension spring until the DC motor controller is operating normally.

Therefore, according to the actual situation of different, different adjustments to the DC motor, everything should be based on the actual, we must learn to work flexible, flexible change of thinking to achieve the goal we want.

http://www.wuzhoumotor.com/